SmallRig NATO Clamp 1885 and Safety Rail 1195B: Rig Setup

Start with the rail, then add the clamp

A NATO rail setup is only as secure as its foundation. The SmallRig Quick Release NATO Safety Rail 7cm 1195B gives you a short, dedicated rail that attaches to any two 1/4-20 holes using the two included 1/4-20 screws. Once mounted, it provides a stable platform for NATO-compatible accessories, including the SmallRig NATO Quick Release Clamp 1885.

The clamp then slides onto the rail and locks in place with its red locking lever. From there, you can mount a monitor, wireless receiver, microphone, or other gear using the clamp’s 1/4-20 mounting points or its cold shoe mount. This two-piece approach lets you keep the rail permanently on your cage or handle while moving the clamp between setups.

What the 1195B rail gives you

• SmallRig Quick Release NATO Safety Rail 7cm 1195B: 7cm standard quick release safety NATO rail, attaches to any two 1/4-20 holes via two included 1/4-20 screws. The 7cm length keeps the rail compact, making it suitable for small cages or handles where space is limited.

  

• SmallRig Quick Release NATO Safety Rail 7cm 1195B: Features spring-loaded pins on both ends to prevent accidental removal. These pins act as a safety stop, reducing the risk of your clamp and attached gear sliding off the end of the rail.

What the 1885 clamp adds

• SmallRig NATO Quick Release Clamp 1885: Attaches to any NATO rail accessories and has 1/4-20 mounting points on the top. The top mounting points let you attach a small camera, monitor, or wireless receiver directly to the clamp.

  

• SmallRig NATO Quick Release Clamp 1885: Allows you to mount a cold shoe, enabling additional accessories such as a flashlight or microphone. A cold shoe expands your rig without needing extra arms or brackets, keeping your setup lighter and more compact.
• SmallRig NATO Quick Release Clamp 1885: Red locking lever for secure clamping. The lever provides a clear visual and tactile confirmation that the clamp is locked onto the rail.

Mounting the rail and clamp

Follow these steps using only the supplied hardware and the features described in the product records. The exact tools and techniques for attaching the rail to your cage are not specified in the supplied information, so use your judgment and the cage manufacturer’s instructions.

1. Find two 1/4-20 holes: Locate two 1/4-20 threaded holes on your camera cage or handle that align with the 7cm rail’s mounting holes.
2. Attach the rail: Secure the 1195B rail using the two included 1/4-20 screws. Tighten them with the included hex spanner. Do not overtighten; the rail should sit flush and stable.
3. Slide on the clamp: With the red locking lever in the open position, slide the 1885 clamp onto the rail from one end. The spring-loaded pins on the rail will compress as the clamp passes.
4. Lock the clamp: Close the red locking lever to secure the clamp in place. The clamp should not slide freely once locked.
5. Add your accessory: Use the 1/4-20 mounting points or the cold shoe on top of the clamp to attach your monitor, microphone, or other gear. Tighten any screws firmly.

Checks before you shoot

• Rail security: Confirm both 1/4-20 screws are tight and the rail does not wobble. The spring-loaded pins should be intact and springy.
• Clamp lock: Verify the red lever is fully closed and the clamp cannot slide along the rail by hand.
• Accessory attachment: Check that any device mounted to the clamp’s 1/4-20 points or cold shoe is secure and does not rotate or slip.
• Clearance: Ensure the clamp and accessories do not obstruct camera controls, ports, or lens movement.

Compatibility and limits to keep in mind

The 1195B rail is compatible with any device that has a NATO rail, and the supplied information notes compatibility with the SmallRig Slide Mount, RED Epic/Scarlet, Black Magic Camera, and other third-party accessories. However, compatibility with specific cages or handles depends on hole spacing and rail clearance, which are not detailed in the supplied information. Measure your cage’s hole spacing before ordering to ensure the 7cm rail will fit.

The 1885 clamp attaches to any NATO rail accessory, but the supplied information does not specify a maximum load capacity or torque rating. For heavy accessories, consider supporting the weight separately or using additional mounting points. Also note that the clamp’s top mounting points are 1/4-20, so devices requiring 3/8-16 will need an adapter (not included).

When to choose this combination

This rail-and-clamp pair suits rigs where you need a quick-release point for a monitor or microphone but want to keep the footprint small. The 7cm rail is short enough for compact cages, and the clamp’s integrated cold shoe and 1/4-20 points reduce the need for extra arms. If you frequently swap accessories, the tool-free locking lever makes changes fast.

For larger accessories or heavier payloads, the absence of a specified load limit means you should test carefully and consider a more robust mounting solution. The supplied information does not include installation instructions for specific cages, so always refer to your cage manufacturer’s guidance for hole placement and torque.