What the Clip-Only Version Includes
The Peak Design Capture Camera Clip v3, Silver - no plate is the clip component only. It does not include a quick-release plate. The clip itself clamps to a backpack strap, belt, or bag, and it has an Arca-type receiver for a plate. To mount a camera, you need a compatible plate, which is sold separately. This version is useful if you already own a Peak Design plate or want to choose one that matches your tripod.
Clip and plate specifications
- Peak Design Capture Camera Clip v3, Silver - no plate: Clip dimensions: 8.3 cm (3.3") x 4.0 cm (1.6") x 2.0 cm (0.79"); weight: 70 g (2.5 oz) including 2 thumb screws. These compact dimensions and light weight make the clip unobtrusive on a strap or belt.
Peak Design Capture Camera Clip v3, Silver - no plate - Peak Design Capture Camera Clip v3, Silver - no plate: Strap compatibility: fits any strap up to 6.4 cm (2.5”) wide and 1.5 cm (0.6") thick with standard thumbscrews, or up to 2.2 cm (0.88”) thick with included hex-head clamping bolts. Check your strap or belt thickness before attaching; if it is thicker than 1.5 cm, use the hex bolts.
- Peak Design Capture Camera Clip v3, Silver - no plate: The clip is tripod compatible and includes an Arca-type receiver; the included Standard Plate (when purchased separately) works with most Arca-type tripods. This means you can mount the camera directly to an Arca-type tripod head without removing the plate from the camera.
Attaching the Clip to a Strap or Belt
The Capture v3 clip is designed to clamp onto a strap, belt, or bag. Follow these steps to secure it. Note that the clip does not include a plate, so you will need to attach a compatible plate to your camera before mounting it in the clip.
- Choose your mounting location: Select a strap, belt, or bag section that is within the supported width and thickness. The clip fits straps up to 6.4 cm (2.5”) wide and 1.5 cm (0.6”) thick with the standard thumbscrews.
- Select the appropriate bolts: For thicker straps up to 2.2 cm (0.88”), use the included hex-head clamping bolts for a more secure fit. The thumbscrews are convenient for easy on/off, while the hex bolts provide permanent or thicker-strap installation.
- Position the clip: Place the clip on the strap so that the Arca receiver faces outward and the quick-release button is accessible. The clip's backplate has an embedded grip to resist slipping.
- Tighten the bolts: Use the thumbscrews or hex bolts to clamp the clip firmly to the strap. Ensure the clip is secure and does not rotate or slide.
Plate Compatibility: What Works with Capture v3
The Capture v3 clip is compatible with most Peak Design plates, but there are important exceptions. The included Standard Plate (when purchased with other kits) is not compatible with legacy Capture models (v1 and v2). However, the v3 clip works with all legacy Peak Design plates except the DUALplate v1 (discontinued in 2014). If you are buying a plate separately, the Standard Plate is a good choice for Arca-type tripods. For Manfrotto RC2 compatibility, you will need a different plate (sold separately).
If you already own a Peak Design plate from a previous Capture system, check its model. Plates from v1 and v2 are generally compatible with the v3 clip, except for the DUALplate v1.
Plate options and compatibility notes
- Peak Design Capture Camera Clip v3, Silver - no plate: The Capture v3 clip works with all legacy Peak Design plates except DUALplate v1 (discontinued 2014). If you have an older Peak Design plate, it will likely work with the v3 clip, saving you from buying a new plate.
- Peak Design Capture Camera Clip v3, Silver - no plate: The included Standard Plate (sold separately) is not compatible with legacy Capture models (v1 and v2). This means you cannot use the Standard Plate with an older Capture clip; it is designed for the v3 and newer.
- Peak Design Capture Camera Clip v3, Silver - no plate: For Manfrotto RC2 compatibility, a separate plate is required (not included). If your tripod uses Manfrotto RC2, you will need to purchase a compatible plate separately.
Using the Clip with a Tripod
The Capture v3 clip itself is not a tripod plate; it is a clip that holds a plate. To use your camera on a tripod, you need to attach a compatible plate to your camera, then either mount the plate directly to the tripod or lock the plate into the Capture clip and mount the clip to the tripod. The clip has an Arca-type receiver, so you can attach it to an Arca-type tripod head. However, the clip does not include a plate, so you must supply one. The Standard Plate is designed for Arca-type tripods and is a common choice.
Checkpoints Before You Buy or Mount
- Strap thickness: Measure your strap or belt. If it is thicker than 1.5 cm (0.6”), use the hex bolts instead of the thumbscrews.
- Plate compatibility: Confirm that your existing Peak Design plate is not a DUALplate v1. If you need a new plate, choose one that matches your tripod system (Arca-type or Manfrotto RC2).
- Tripod system: The clip's Arca receiver works with Arca-type plates. For other systems, you may need an adapter or a different plate.
- Security lock: The clip has a redundant security lock to prevent accidental release. Make sure you engage it when carrying your camera.
