The two pieces that make the mount work
An articulated arm gives you flexible positioning, but it needs a proper camera platform to hold your camera securely. The Ercole MB-42 Articulated Arm provides 1/4-inch and 3/8-inch female threads for attaching accessories, while the Ercole M11-071 Camera Platform offers a 1/4-inch camera screw and a 5/8-inch receiver. Together, they create a reliable interface for mounting a camera on a stand or arm.
This guide explains how to assemble these components safely, based on the supplied product information. Always check that your specific camera and support hardware are compatible before use.
Ercole MB-42: the arm's mounting points
- Ercole MB-42 Articulated Arm 1/4″ female & 3/8″ female: Features 1/4-inch and 3/8-inch female threads for attaching accessories. These threads let you connect the arm to a stand or clamp, and they determine what else you can attach.

Ercole MB-42 Articulated Arm 1/4″ female & 3/8″ female - Ercole MB-42 Articulated Arm 1/4″ female & 3/8″ female: Articulated design allows for precise positioning and adjustment during shoots. You can fine-tune camera angle and position without moving the entire stand.
- Ercole MB-42 Articulated Arm 1/4″ female & 3/8″ female: Suitable for use with lights, reflectors, or other lightweight equipment. This indicates the arm is intended for lightweight gear; check your camera's weight against the arm's capacity, which is not specified in the supplied information.
Ercole M11-071: the camera platform interface
- Ercole M11-071 Camera Platform 1/4"Camera Screw - 5/8" receiver: Standard 1/4-inch camera screw for secure attachment to most cameras and camcorders. This is the thread size used by most cameras, so it should fit your camera's tripod socket.

Ercole M11-071 Camera Platform 1/4"Camera Screw - 5/8" receiver - Ercole M11-071 Camera Platform 1/4"Camera Screw - 5/8" receiver: 5/8-inch receiver fits common light stands, booms, and studio supports. The receiver allows the platform to be mounted on a 5/8-inch stud, which is common on light stands and some arm ends.
- Ercole M11-071 Camera Platform 1/4"Camera Screw - 5/8" receiver: Durable construction designed for repeated use in professional environments. Suggests the platform can withstand regular setup and teardown.
Step-by-step: mounting your camera on the arm
Follow these steps to assemble the arm and platform, then attach your camera. The exact method for securing the arm to a stand depends on your stand's fitting, which is not covered by the supplied information; consult your stand's manual if unsure.
- 1. Attach the platform to the arm: The M11-071 has a 5/8-inch receiver, and the MB-42 has 1/4-inch and 3/8-inch female threads. You will need a 5/8-inch stud or adapter to connect them. The supplied information does not specify a direct connection method, so verify you have the correct hardware.
- 2. Secure the arm to a stand or clamp: Use the appropriate thread on the MB-42 to attach it to your stand or clamp. Ensure the connection is tight, but do not overtighten.
- 3. Mount the camera on the platform: Screw the camera's tripod socket onto the 1/4-inch camera screw of the M11-071. Tighten until snug.
- 4. Adjust the arm's position: Loosen the arm's articulation joints (if applicable) to position the camera. Tighten all joints securely before letting go of the camera.
- 5. Perform a safety check: Gently push down on the camera to test stability. Check that all connections are tight and that the arm is not overloaded. The MB-42 is described as suitable for lightweight equipment; if your camera is heavy, consider a more robust support.
Safety considerations for articulated arm use
Articulated arms offer flexibility but require careful setup to prevent tipping or dropping equipment. Always place the stand on a level surface and use sandbags or counterweights if available. Keep the arm's load within reasonable limits—the MB-42 is intended for lightweight gear, and the supplied information does not provide a maximum load rating, so use your judgment and err on the side of caution.
Before each shoot, inspect the threads and connections for wear. Avoid overextending the arm, which can create leverage that destabilizes the stand. When adjusting the arm, support the camera with one hand while loosening joints.
What the supplied information does not confirm
The product records do not specify a maximum load capacity for the MB-42 or the M11-071, nor do they confirm compatibility with specific camera models or stand brands. They also do not include detailed assembly instructions or torque specifications. For critical applications, consult the manufacturer's documentation or test the setup carefully before use.


