What the Pavotube II 6C Coupler actually does
If you already own two Nanlite Pavotube 6C tubes and want a longer, continuous light source, the Nanlite Pavotube II 6C Coupler is the small part that makes it possible. It is a male-to-male 1/4-20 coupler: each end screws into the threaded 1/4-20 socket at the end of a Pavotube 6C, joining the two tubes end-to-end.
That is the whole job. The coupler does not add power, data, or control—it is a mechanical link. The result is a single rigid bar made from two tubes, which can be useful when you need a longer strip of light for a wall, a backdrop, or a tight space where a single tube falls short.
The coupler in one line
- Nanlite Pavotube II 6C Coupler: Male-to-male 1/4-20 coupler that screws into the end of two Pavotube 6C tubes to join them end-to-end. This is the core function: it turns two separate tubes into one longer bar using the existing 1/4-20 sockets on each tube.

Nanlite Pavotube II 6C Coupler
How to join two Pavotube 6C tubes with the coupler
The supplied information does not include a step-by-step procedure, so the following is a logical assembly sequence based on the coupler’s described function. Treat it as a planning guide, not a manufacturer instruction.
- Check that both tubes have a free 1/4-20 end socket: The coupler screws into the end of each tube. Make sure the end you plan to use is accessible and not already occupied by another accessory.
- Screw one end of the coupler into the first tube: Thread the male end into the 1/4-20 socket on the end of the first Pavotube 6C. Hand-tighten only; the supplied information does not specify a torque.
- Screw the second tube onto the other end: Support the first tube while you attach the second so the joint is not carrying the full weight during assembly.
- Check the joint before mounting: Once both tubes are attached, gently confirm the connection is secure. The coupler is a rigid link, so any flex comes from the tubes or the mounting points, not the coupler itself.
Mounting a two-tube bar: what the coupler does and does not solve
The coupler joins the tubes, but it does not provide a stand mount. For a tube light bar setup, you will still need to support the combined bar at one or more points. The Pavotube 6C tubes have 1/4-20 sockets at their ends, and many tube mounts use those same threads—but the supplied information for this coupler does not confirm which stands, clamps, or mounting accessories are compatible with a joined pair.
That matters because a longer bar changes the load. Two tubes joined end-to-end create a wider span and more leverage than a single tube. Before you hang or stand-mount the pair, check the rated capacity of your stand and any clamps you use. The coupler itself has no published load rating in the supplied information, so treat the joint as the weakest point until you have tested it gently.
Compatibility at a glance
- Nanlite Pavotube II 6C Coupler: Designed for joining multiple Pavotube 6C tubes together. The coupler is specific to the Pavotube 6C. The supplied information does not confirm compatibility with other Nanlite tube models or third-party tubes.
- Nanlite Pavotube II 6C Coupler: Uses a male-to-male 1/4-20 thread. 1/4-20 is a common thread, but the coupler is intended for the end sockets of Pavotube 6C tubes. Do not assume it will fit other fixtures without checking the thread depth and load.
Practical checks before you buy
- Confirm you have two Pavotube 6C tubes: The coupler is listed for the Pavotube 6C. If you own a different Pavotube model, the supplied information does not confirm it will fit.
- Plan how you will support the joined bar: A two-tube bar needs at least one mounting point, and possibly two for stability. The coupler does not include a stand adapter.
- Decide whether you need a permanent or temporary join: The coupler screws in, so it can be removed. If you frequently switch between single tubes and a bar, that is an advantage.
- Check the price against the job: At USD 6.50 (catalog comparison price USD 10.00), the coupler is a low-cost way to extend your existing tubes rather than buying a longer fixture.
When a joined pair makes sense—and when it does not
A two-tube bar is handy when you want a continuous line of light along a wall, a product table, or a background. It can also work as a longer edge light for portraits if you have a safe way to position it. Because the coupler is purely mechanical, each tube keeps its own controls and power connection; you will need to set both tubes to matching brightness and color if you want an even bar.
On the other hand, if you need a single long tube for travel, a joined pair is heavier and more awkward to pack. And if you need a rigid, stand-mounted bar with a known load rating, the supplied information does not give you that rating for the coupler, so you would need to verify suitability with the manufacturer or test carefully.
Product facts
- Nanlite Pavotube II 6C Coupler: Nanlite Pavotube II 6C Coupler, catalog price USD 6.50 (comparison price USD 10.00). A low-cost accessory that lets you reuse two existing 6C tubes as a longer bar.

