TetherMate für Studio-Tethering einrichten
By Borge's Imaging — Shop Photography, Printing and Studio Gear in Melbourne Borge's Imaging | Published: 2026-10-25
Category: Anleitungen
Erfahren Sie, wie Sie ein Kupo TetherMate für zuverlässiges Laptop-Tethering im Studio einrichten – inklusive Montage, Kabelmanagement und Zubehörintegration.
Quick Answer
Mount the Kupo KS-312B TetherMate to a tripod or stand, slide the hard drive holder into the U-shaped bracket, and route your cables neatly for a stable studio tethering setup.
Why a Dedicated Tethering Platform Matters
Tethering directly to a laptop on a regular table or cart often leads to cable strain, accidental disconnects, and a cluttered workspace. The Kupo TetherMate system solves this by giving your laptop a secure, portable platform that mounts directly to a tripod or light stand, keeping it at a comfortable height near your camera.
The KS-312B model includes three mounting slots under the plate, letting you attach accessories like a hard drive holder or mouse side table without drilling or clamps. This modular approach keeps your workflow organized and reduces the risk of gear damage during a shoot.
What You Can Attach to the TetherMate
The U-shaped plate under the TetherMate is designed to accept the Kupo KS-306B hard drive holder. It slides into the mounting bracket and stays locked with the spring locking knob. This keeps your external drive off the floor and within reach.
For mouse users, the Kupo KS-311B Mouse Side Table provides a 152mm x 152mm surface that attaches to one of the accessory slots. It is a simple addition that saves desk space and gives you a stable mousing area next to the laptop.
Step-by-Step TetherMate Setup
- Mount the TetherMate to a Tripod or Stand: Screw the Kupo KS-312B onto a tripod or light stand using the 1/4"-20 or 3/8"-16 threads on the underside. Tighten the spring locking knob to secure the U-shaped sliding plate. Make sure the stand is stable and the plate is level before placing your laptop on it.
- Attach the Hard Drive Holder: Slide the Kupo KS-306B U-shaped plate into the mounting bracket under the TetherMate until it clicks. Place your external hard drive into the holder. Do not overload the holder — it supports drives up to roughly the size of a standard 2.5" or 3.5" external drive. Check clearance before tightening.
- Add the Mouse Side Table (Optional): Insert the Kupo KS-311B Mouse Side Table into one of the three accessory slots on the underside of the TetherMate. Tighten the included knob to lock it in place. Position the mouse table on the side opposite your camera tether cable to keep cables from tangling with your mouse.
- Route and Secure Cables: Run the tether cable from your camera to the laptop along the edge of the TetherMate plate. Use Velcro straps or cable clips to fasten the cable to the stand leg so it does not pull on the laptop port. Leave a small loop of slack near the laptop port to prevent strain if the cable gets tugged accidentally.
- Test the Setup Before a Shoot: Connect your camera, open tethering software, and confirm the laptop is stable and the cables do not interfere with your movement. Adjust the plate height or accessory positions as needed. If the plate wobbles, check that the stand head is tightened and the spring locking knob is fully engaged.
TetherMate Products Used in This Guide
- Kupo KS-312B Tethermate for Macbook Pro with accessory mount slots: 17.5" x 11.7" plate with 1/4"-20 and 3/8"-16 female threads on the underside, three mounting slots, and round edges. The plate fits most MacBook Pro models and mounts directly to a tripod or stand without an adapter, while the slots let you add accessories like a hard drive holder or mouse table.
Kupo KS-312B Tethermate for Macbook Pro with accessory mount slots - Kupo KS-306B Hard drive holder for Tethermate: U-shaped plate slides into the mounting bracket under the table; weighs 200g. This hard drive holder keeps your external drive securely attached to the TetherMate, preventing it from dangling or getting knocked over during a shoot.
Kupo KS-306B Hard drive holder for Tethermate - Kupo KS-311B Mouse Side Table for Tethermate: 152mm x 152mm surface, 200g weight. A compact mouse side table that attaches to the TetherMate accessory slots, giving you a stable mousing area without taking up floor or table space.
