Three Rode windshields, two microphone types
Rode's MINIFUR-LAV, WS-Lav and WS6 all tackle wind noise, but they are not interchangeable. The first two are built for lavalier microphones, while the WS6 is a deluxe windshield for shotgun mics. The right choice depends on which microphone you use and how much wind you expect.
Below we compare the supplied specifications, pack sizes and compatibility notes so you can match the windshield to your recording setup without guessing.
Lavalier windshields: MINIFUR-LAV and WS-Lav
- Rode MINIFUR-LAV Windshield for Lavalier Mic: Artificial fur windshield designed for Rode Lavalier microphone; supplied in a pack of three; suits outdoor recording in high wind. The fur design targets high-wind outdoor use, and the three-pack gives you spares for multiple lav mics or replacements.

Rode MINIFUR-LAV Windshield for Lavalier Mic - Rode WS-Lav Pop Filter / Wind Shield: Pop filter/wind shield designed to fit the Lavalier microphone; supplied as a pack of three; weight 1.00gm; dimensions 15.00mmH x 11.00mmW x 11.00mmD; warranty 1 year. This is a compact pop filter for lavaliers. The small size and light weight make it unobtrusive, and the one-year warranty adds peace of mind.

Rode WS-Lav Pop Filter / Wind Shield
MINIFUR-LAV vs WS-Lav: which lavalier shield?
The MINIFUR-LAV is explicitly described as an artificial fur windshield for the Rode Lavalier, and additional details say it fits the Lavalier and Smartlav+. Its fur construction is aimed at high-wind outdoor recording. The WS-Lav is described as a high-quality pop filter designed to fit the Lavalier microphone, and it should be fitted in most applications to prevent hard plosive sounds from overloading the capsule.
In practice, the MINIFUR-LAV is the more specialized outdoor wind solution, while the WS-Lav is a general pop filter that also helps with wind but is not marketed as a high-wind fur cover. Both come in packs of three, so you get multiple units either way. If you record outdoors in gusty conditions, the MINIFUR-LAV's fur design is the clearer match. For indoor or calm-weather recording where plosives are the main concern, the WS-Lav is a sensible choice.
Note that the MINIFUR-LAV listing states that the lavalier mic, cable and clip are not included. The WS-Lav listing does not mention included accessories, so check what comes in the pack if that matters to you.
Shotgun windshield: WS6 Deluxe
- Rode WS6 Deluxe Wind Shield: Suitable for Rode NTG1 and NTG2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm. This defines the fit: if your shotgun mic falls within these dimensions, the WS6 is an option; if not, it won't fit properly.
- Rode WS6 Deluxe Wind Shield: Combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur; rubber base prevents wind noise from entering the rear of the microphone pickup area. The foam and fur combination is designed to reduce wind noise in adverse conditions, and the rubber base addresses rear wind ingress.
When the WS6 is the right tool
The WS6 is not a lavalier accessory. It is a deluxe windshield for shotgun microphones, and its fit is defined by maximum slot length and diameter. If you use a Rode NTG1 or NTG2, or another shotgun mic that measures within 160.5mm slot length and 21-22.5mm diameter, the WS6 is built for you. It combines foam and fur to handle adverse environmental conditions, and the rubber base is intended to stop wind noise from entering the rear of the mic.
Because the WS6 is physically much larger (100.00mmH x 100.00mmW x 185.00mmD) and heavier (50.00gm) than the lavalier options, it is not something you would attach to a lapel. It is a slip-on windshield for a shotgun mic body.
Key differences at a glance
- Microphone compatibility: MINIFUR-LAV: Rode Lavalier and Smartlav+. WS-Lav: Lavalier microphone. WS6: Rode NTG1/NTG2 and other shotguns within 160.5mm slot length and 21-22.5mm diameter.
- Pack size: MINIFUR-LAV and WS-Lav each come in packs of three. The WS6 is supplied as a single deluxe windshield.
- Wind protection approach: MINIFUR-LAV uses artificial fur for high-wind outdoor recording. WS-Lav is a pop filter that also reduces wind noise. WS6 combines open-cell foam with artificial fur and adds a rubber base to seal the rear.
- Physical size: WS-Lav: 15.00mmH x 11.00mmW x 11.00mmD, 1.00gm. WS6: 100.00mmH x 100.00mmW x 185.00mmD, 50.00gm. MINIFUR-LAV dimensions are not supplied.
What the supplied information does not confirm
The records do not include detailed installation steps for any of these windshields, nor do they specify acoustic performance figures or exact fur composition. For the MINIFUR-LAV, dimensions and weight are not provided. For the WS-Lav, the listing does not clarify whether it includes any mounting accessories. The WS6 listing gives compatibility by slot length and diameter, but does not list every compatible microphone model beyond the NTG1 and NTG2.
If you need precise fit assurance for a non-Rode shotgun mic, measure your mic's slot length and diameter against the WS6's stated limits. For lavaliers, the MINIFUR-LAV and WS-Lav are both listed as fitting the Rode Lavalier, but check whether your specific lavalier model is mentioned if you use a third-party mic.



