Quick answer
Buy the Phottix Ares II transmitter if you only need to fire one off-camera flash or studio light that already has a receiver built in or connected. Buy the receiver if you need to add a second light to an existing Ares II system or replace a failed receiver. For a new two-light manual setup, you need one transmitter and two receivers.
The transmitter is the camera-side command unit
The transmitter mounts on your camera's hot shoe and sends the trigger signal. It does not receive signals, so it cannot fire a flash on its own. If your studio strobe already has a compatible receiver or you are triggering a single hot shoe flash through another receiver, the transmitter is the only Ares II unit you need on the camera.
This makes the transmitter the lower-cost entry point into the Ares II system, but only if you already own a receiver or your light has one built in. Check your existing gear before assuming you need both units.
The receiver is the light-side unit you add per flash
The receiver connects to your flash or studio light and listens for the transmitter's signal. One receiver controls one light. If you want two off-camera lights, you need two receivers plus one transmitter.
Buying a receiver alone only makes sense if you already have an Ares II transmitter. Without a transmitter, a receiver has nothing to listen to. This is the most common mistake when building a manual flash trigger pair.
Cost trade-off: one transmitter versus multiple receivers
The transmitter is the cheaper unit in the Ares II line, but it only works with at least one receiver in the chain. The receiver costs slightly more per unit, and your total spend rises with each additional light you want to control.
For a single-light setup, one transmitter and one receiver is the minimum working pair. For two lights, budget for one transmitter and two receivers. There is no way to split one receiver across two lights.
Manual-only system limits automatic features
The Ares II system is designed for manual shooting with studio lights or hot shoe flashes. It does not provide through-the-lens (TTL) metering or high-speed sync based on the supplied product information. That means you set flash power manually on each light, which is normal for studio work but slower for fast-changing outdoor situations.
If you rely on TTL or automatic exposure, this system will not replace a camera-brand trigger with those features. The trade-off is simplicity and lower cost versus giving up automated flash output.
Trade-offs to weigh before you buy
- Transmitter-only purchase: Choose this if you already own an Ares II receiver or your studio light has a compatible built-in receiver. You save money but cannot trigger any light without a receiver in the chain. Confirm you have a receiver before buying only the transmitter.
- Receiver-only purchase: Choose this to add a second light to an existing Ares II setup or to replace a failed receiver. It is useless without a transmitter already on your camera. Do not buy a receiver as your first Ares II unit.
- Full pair for a new setup: For one off-camera light, buy one transmitter and one receiver. For two lights, buy one transmitter and two receivers. The system is manual-only, so you will set power on each light by hand. Count your lights first, then buy one receiver per light plus one transmitter.
Product facts
- Phottix Ares II Flash Trigger Transmitter: Budget-friendly flash trigger system designed for manual shooting with studio lights or hot shoe flashes. It gives you a low-cost way to fire manual lights from the camera without paying for TTL features you may not need.

Phottix Ares II Flash Trigger Transmitter - Phottix Ares II Flash Trigger Receiver: Receiver unit in the same budget-friendly Ares II system for manual studio lights or hot shoe flashes. Each receiver adds one controllable light to your setup, so plan how many lights you need before buying.

Phottix Ares II Flash Trigger Receiver
Who should buy which unit
Best for
- Photographers building a manual off-camera flash setup with studio lights or hot shoe flashes
- Anyone adding a second or third light to an existing Phottix Ares II system
- Budget-conscious shooters who do not need TTL or automatic flash metering
Not for
- Photographers who need through-the-lens (TTL) metering or automatic flash exposure
- Users who want a single-unit trigger with a built-in receiver for every light
- Situations requiring high-speed sync or advanced wireless features not listed for this system


