Epson SC-P906 Roll Paper Unit Setup Guide
By Borge's Imaging — Shop Photography, Printing and Studio Gear in Melbourne Borge's Imaging | Published: 2026-10-27
Category: How-to Guides
Learn how to install and set up the Epson SC-P906 Roll Paper Unit for seamless roll media printing. Step-by-step instructions included.
Quick Answer
Install the Epson SC-P906 Roll Paper Unit by attaching the bracket, inserting the roll onto the spindle, and loading it through the rear feed slot. This accessory accepts 13" to 17" wide media on 2-inch or 3-inch cores.
Why Use the Roll Paper Unit?
The Epson SC-P906 Roll Paper Unit lets you print on continuous roll media up to 30.5 meters long, ideal for panoramic prints, banners, or high-volume proofing. It saves you from manually feeding individual sheets and reduces waste when printing multiple copies.
One trade-off: the unit adds bulk to your printer setup, so ensure your workspace has enough clearance behind the printer for the roll to feed smoothly.
Step-by-Step Installation
- Prepare the Printer and Workspace: Turn off the printer and unplug it. Clear at least 60 cm behind the printer for the roll paper path. Remove the rear paper cover if attached. A cramped rear space can cause paper jams during feeding.
- Attach the Roll Paper Unit Bracket: Align the bracket with the mounting holes at the rear of the printer. Secure it using the provided screws. Tighten firmly but avoid over-torquing. Hand-tighten only; overtightening can strip the plastic threads.
- Load the Roll onto the Spindle: Slide the roll onto the spindle, ensuring the paper unwinds from the bottom toward the printer. Insert the core adapters for a snug fit if using a 2-inch core. Unwinding from the top instead of the bottom will cause the paper to feed upside down.
- Insert the Spindle into the Bracket: Place the spindle ends into the bracket slots. Push until they click into place. Spin the roll gently to check it rotates freely. If the spindle doesn't click, it may fall out during printing.
- Feed the Paper Through the Rear Slot: Guide the paper edge into the rear feed slot until the printer grabs it. Use the printer's front panel to select 'Roll Paper' as the paper source and confirm the paper width. Always trim the paper edge straight before feeding to avoid skew.
- Run a Test Print: Send a small test print from your software. Check alignment and paper tension. Adjust the paper feed setting in the printer driver if the print is misaligned. If the paper wrinkles, reduce the paper tension setting in the driver.
Product Facts
- Epson SureColor P906 Roll Paper Unit: Accepts roll media from 13" to 17" wide, works with rolls up to 30.5m long, compatible with 2-inch and 3-inch cores. You can use a wide range of popular photo and fine-art paper rolls without needing extra adapters or spacers.
Epson SureColor P906 Roll Paper Unit
