What the INFINIBAR PB6 Light Control Grid Does
The INFINIBAR PB6 45° Light Control Grid is a fabric modifier designed specifically for the Aputure INFINIBAR PB6 LED Pixel Bar. It limits the beam spread to 45°, reducing unwanted spill light without significantly increasing the footprint of the 2-foot bar light. This turns the PB6 into a more directional light source while keeping its slim profile.
Aputure INFINIBAR PB6 Light Control Grid at a Glance
- Aputure INFINIBAR PB6 Light Control Grid 45deg: Fabric 45° Control Grid for the Aputure INFINIBAR PB6 Confirms the grid is purpose-built for this specific LED bar, ensuring a precise fit and predictable beam control.

Aputure INFINIBAR PB6 Light Control Grid 45deg - Aputure INFINIBAR PB6 Light Control Grid 45deg: Secures directly onto INFINIBAR PB6 body using hook-and-loop straps Attaches without tools or additional brackets, making setup quick even during a shoot.
- Aputure INFINIBAR PB6 Light Control Grid 45deg: Collapsible into compact shape for storage The grid folds flat when not in use, saving space in your kit bag.
What You Need for Setup
- Aputure INFINIBAR PB6 LED Pixel Bar: The grid is designed exclusively for this 2-foot bar light. It does not fit other INFINIBAR models or third-party bars.
- Aputure INFINIBAR PB6 45° Light Control Grid: The fabric grid with hook-and-loop straps. The supplied information does not confirm additional mounting hardware is required.
Attaching the Grid to the INFINIBAR PB6
The grid uses hook-and-loop straps that secure directly onto the PB6 body. The following steps are based on the product's stated design. The supplied information does not include a manufacturer-issued step-by-step manual, so these steps reflect the general attachment method implied by the features.
- 1. Position the grid: Hold the grid so the fabric faces the front of the PB6. The hook-and-loop straps should align with the sides or back of the bar light.
- 2. Wrap the straps around the PB6 body: Pull each strap around the corresponding edge of the PB6 body and attach the hook-and-loop fastener firmly. Ensure the grid sits flush against the front of the bar.
- 3. Adjust for even coverage: Check that the grid is centered and covers the entire light-emitting surface. Tighten or reposition the straps as needed to eliminate gaps.
- 4. Verify the beam angle: Once attached, the grid narrows the beam spread to 45°. Test by pointing the PB6 at a wall and observing the reduced spill compared to the bare bar.
Practical Considerations When Using the Grid
The grid does not significantly increase the footprint of the PB6, so it remains compact for tight spaces. Its lightweight design means it won't strain the mounting bracket or stand. When not in use, the grid collapses into a compact shape for storage. The supplied information does not confirm whether the grid can be used with other modifiers like barn doors or softboxes simultaneously.

